Transmitters and Receivers

The SIGTRANS0 transmitter transfers variables to one or several receiver submodels (SIGRECEI0) without any visible connection on the sketch. A transmitter and receiver behave as if the output of the transmitter is connected to the input of the receiver. As a result, the receiver output is actually a duplicate of the transmitter input. This connection is not visible on the sketch, as the two components are not directly connected and are not linked by a line.

Transmitter and receiver components are dynamic, and the number of inputs and the dimension of each input are defined when they are added to the sketch. These settings can be modified in Sketch mode only. This enables the transmission of multiplexed signals:

Please refer to their respective HTML documentation for more details on these two submodels.