Supported Simulink Interface modes

Supported interface modes are shown below:

Envisaged interface mode	Supported
1.1 Co-simulation in Simcenter Amesim: Simcenter Amesim as Master (Simulink as Slave)	Yes 1.2. (SL2AMECosim)
2.1 Co-simulation in Simulink: Simcenter Amesim as Slave (Simulink as Master)	Yes 3. (AME2SLCosim)
2.2 Model Exchange: Export of Simcenter Amesim model into Simulink	Yes 3.4. (AME2SL)
For SL2AMECosim, please note that once the Simulink model has been imported into Simcenter Amesim, Simulink is not needed anymore for running the simulation (and no Simulink license either). In SL2AMECosim, the embedded Simulink solver is always of type fixed-step. Simulink model referencing is supported. For model exchange or co-simulation in Simulink (AME2SL or AME2SLCosim), Simcenter Amesim models (with or without solver) are exported as S-functions. These S-functions comply with the Simulink Accelerator Mode but not with the Rapid Accelerator Mode. This mode complies with the Black-Box option.