Simulating the Modelica RLC model

In the last step, you can simulate the RLC model and plot some results.

Procedure

1. Click on the green Start Simulation button to run a 10s simulation

2. After completion, click on the Modelica component and plot the current and voltage variables for the resistor, inductor and capacitor:

   Figure 52: Current and voltage variables

Results

After compilation, you still have access to several parameters from the Modelica model within the Simcenter Amesim Parameter view (including initial values for the capacitor voltage and inductor current). Therefore, you are free to modify parameter values, run new simulations and generate new plots, as per usual.