General

The General tab allows you to configure the overall appearance and behavior of the application.

Figure 257: Preferences

Preview of *.ame systems in file browser

Preferences preview of the system

preview of the system

This checkbox controls whether or not a preview of the system is shown in the file browser when selecting .ame files. You might wish to disable the preview if you find your machine slows down when saving systems.

Figure 258: Preview of the system in the browser

Enable window docking

Enable window docking

Preferences Enable window docking

Select this checkbox to enable window docking mode. This mode allows you to move the various panes around your workspace and to dock them elsewhere. For example, with this mode enabled you can move the Parameters pane and position it in your workspace. When it is not selected, you can still double click a pane to "float" it above your workspace, but you cannot dock it.

Note

Enable window docking mode is activated by default.

Use big icons for tools

Preferences use big icons for tools

Use big icons for tools

Select this checkbox to toggle the application tool icons to a larger size.

Auto adjust column width to content length

Auto adjust column width to content length

Select this checkbox if you want Simcenter Amesim Run to automatically adjust the width of columns so that column titles are not truncated.

Auto update pathlist

Select this checkbox if you want Simcenter Amesim Run to automatically update the path list after any changes. See Automatically updating the path list for more information.

Show security warnings

De-select this checkbox if you want to turn off the warning message displayed when you import apps from external sources.

Number of 'Recent files'

Last opened files list

Number of files in Last Opened Files list

Preferences number of files in Last Opened Files list

This is set to 4 by default, the maximum possible number is 20.

Display language

Use the drop-down list to select the display language (English or Chinese).

Note

If you change the display language, you must restart the application for the modification to be applied.

Sketch

Display jumps at line crossing points Display jumps at line crossing points : Use this checkbox to toggle the display of line jumps when two lines intersect on the sketch.

Application font

This button gives access to font personalization.

If you make any changes, they will be applied to Simcenter Amesim Run. On some machines when Simcenter Amesim Run is installed, the default font is unsuitable. Use this facility to correct this problem.

Figure 259: Modify the default font if necessary

Reset layout

Reset layout

If you have reorganized the layout of your interface (moved toolbars and dock windows to new positions) you can click this button to restore the default Simcenter Amesim Run layout.

Parameters

• Copy parameters option

Preferences copy parameters option

Copy parameters option: This option allows you to select the method by which parameters are copied (this can be when the set title or the original title or both titles match).

• Path handling

Preferences path handling

Path handling: Three options are possible.

For the last two options the following pre-requisites must be respected:

The data file name must start with the circuit name followed by _.filename.

The data file must be stored in the same location as the circuit.

The three options are as follows:

Use standard behavior: If you use this option, the name of the file selected will not be modified. This option also ensures that relative paths are used when possible. When relative paths cannot be used, absolute paths will be used.

Replace with the generic name: This option replaces the name of the file selected with the generic name when possible -${circuit_name}

Replace with the full generic name: This option replaces the name of the file selected with the full generic name when possible -${full_circuit_name}

For example: You create a circuit called myModel.ame in which a component refers to a data file named MyModel_.cam.data, which is located in the same directory as the circuit. Here are the results you get according to the option selected: Figure 260: Use standard behavior

Figure 261: Replace with the generic name

Figure 262: Replace with the full generic name

If you then save the circuit as myNewModel.ame. the simulation runs will fail for the new circuit if the first option is selected, as the application will not be able to find the file myNewModel_.cam.data. If the other two options are used, the simulation will succeed as the file name is updated with the new circuit name. For more information on generic names, see Generic data filenames. Warning Known limitation: for global parameters, standard behavior is always used in the Global Parameters window, even if you select one of the other two options.