Other features available > Features available in Sketch mode > Adding components to the sketch
Actions when a component is added to the sketch
Whichever method of adding the component is used:
- Connect
An attempt is made to connect the component to other components already added to the sketch (if they are close enough as shown in figure Figure 392).
- If only one submodel is available, it is assigned to the component. If no submodel is available for the component, it cannot be added to the sketch.
Source: https://docs.sw.siemens.com/en-US/doc/254352342/PL20250521841123434.amesim_collection.Reference/Actions_when_a_component_is_added_to_the_sketch · retrieved 2026-07-17