Auto Dashboard

As well as the standard position, rotation, and opacity properties, the Auto Dashboard can be configured as follows:

• Speed: Enter a value to define the speedometer indicator position.

• RPM: Enter a value to define the Rev counter indicator position.

• Temperature: Enter a value to define the temperature gauge indicator position.

• Fuel: Enter a value to define the fuel gauge indicator position.

• Max speed: Enter a value to define maximal speed of the speedometer.

• Speed steps: Enter a value to define the value increments for the speedometer.

• Fuel: Enter a value to define the fuel gauge indicator position.

• Max RPM: Enter a value to define maximal RPM of the Rev counter.

• RPM Red: Enter a value to define the starting point for the red zone in the Rev counter.

• RPM steps: Enter a value to define the value increments for the Rev counter.

• Max temperature: Enter a value to define maximum temperature for the temperature gauge.

• Left: Enter a value for the left-hand turn indicator arrow. 0 = off, 1 = on.

• Right: Enter a value for the right-hand turn indicator arrow. 0 = off, 1 = on.

• Indicators 1 to 12: Enter a value for the indicators (headlights, A/C, Fuel warning etc. at the bottom of the display) to hide or display them in the Auto Dashboard, 0 = off, 1 = on.

• Indicator images 1 to 12: Click in the value field and then click the browse button to select an image for each of the indicators (headlights, A/C, Fuel warning etc. at the bottom of the display).

Note

The maximum size for an image used for an indicator is 100 pixels X 100 pixels.

The use of these objects is described in Objects and their Property types.