Saving and loading batch parameters

You can save and load batch parameters using the corresponding buttons.

Figure 37: Loading and saving batch parameters

Open the Study Manager:

• Click Save to save the current batch parameters for later use.

• Click Load to load a previously saved set of batch parameters.

Results

Batch parameters are saved to a .sad file, which you can save wherever you like. This file is not included in the .ame file of the model, and can be loaded for the same or a different model.

When loading a batch parameter set into a model, the parameters will appear in the Studies parameter list provided that model contains the same parameters, in the same instance of the same submodel. These parameters will also be added to the Input parameters list of the Parameters tab.

Note

You can have only one batch study loaded at a time. When loaded, it is accessible from the left-hand side studies list and referred as Default_Batch. This name cannot be modified.