Using batch runs

batch run

Note

If you work with a multiprocessor machine, please consult the Parallel Processing manual.

This is, however, not required for the completion of this tutorial.

With a batch run a number of runs are initiated with different sets of parameters. These runs are performed sequentially. This creates a series of results files (and Jacobian files if linear analysis is performed). A batch run is initiated in the following stages:

• The characteristics of the parameter values are defined in Parameter or Simulation mode by selecting Study parameters from the Configure menu.

• The batch run is specified in Simulation mode by producing a Run parameters dialog box with the Batch radio button selected.

• Plots of batch runs are done by creating a standard plot and converting it to a batch plot.

In the current example, we will do a batch run varying the damper rating in N/(m/s) as follows:

Run 1	Run 2	Run 3	Run 4	Run 5	Run 6	Run 7
400	600	800	1000	1200	1400	1600

The first step is to define the batch parameter.