AmesimKnowledge

Definitions

Cavitation phenomenon

Cavitation phenomenon The phenomenon of air/gas release is very important in simulation of fluid system. In addition to this, there is a separate phenomenon called cavitation.

If the pressure of the fluid is reduced, at some point the fluid will boil, this phenomenon is called cavitation. This occurs when the pressure reaches the saturated vapor pressure. Normally the fluid is not chemically pure and hence this boiling occurs over a range of pressures. We will refer to the pressure at which cavitation starts as PHvap and the pressure at which it is complete as PLvap.

Figure 19: Comparison between “boiling” and “cavitation” phenomena

Source: https://docs.sw.siemens.com/en-US/doc/254352342/PL20250521841123434.amesim_collection.TB118_Bosch_Fuel_Properties/xid1848958 · retrieved 2026-07-17